STORAGE SLOT

AVOIDS TANGLED ROPES! All UNI.XT and POWER.XT 2.0 feature a slotted top cap. This way you can get rid of the excess rope during storage and transportation.

ISNAP 2.0

Based on the original SDM adjustment ring the iSNAP 2.0 offers some unique benefits:

1. The extension tube cannot come in contact with the mast anymore thus preventing any contact corrosion. No other RDM extension can do this!
2. The 2-component pins feature a synthetic head which prevents the tube from being damaged during the adjustment process.
3. The iSNAP 2.0 is the lightest adjustment system on earth. Yet the proven construction provides maximum durability.

Attention: the RDM iSNAP 2.0 is NOT compatible with older RDM extensions (season 2019 and older).

DOUBLE FOOT TRIM

30% POWER SAVING! In terms of rigging comfort the UNI.XT offers much more than existing standard extensions. In order to ensure the most effective tensioning of the downhaul Duotone have designed the cup under ergonomic points of view incorporating the DOUBLE.FOOT.TRIM. Through the intelligent positioning of the cleat, for the first time it is now possible to prop with both feet against the cup, and thus cope far greater forces avoiding lower back strain. Now you can use the same technique for the downhauling as in rowing, where you naturally also use both feet to mobilize maximum power through pushing with the feet rather than pulling through your back. That increases the power efficiency by approx. 30% compared to the usual one foot operation!

2 THREAD SYSTEM UNI.XT

NOW COMPATIBLE WITH ALL SAIL BRANDS! The POWER.XT 2.0 features a stainless-steel open pulley enabling loop-loop-go rigging – the fastest and most comfortable way to rig your sail! The UNI.XT is now the first choice even for sails with twisted tack-rollers (e.g. Loft, Naish, Severne). Furthermore, this roller arrangement for the first time enables the Loop-Loop-Go feature for all sail brands. Simply fit the rope loop over one of the outer rollers and start trimming.

RAPID RELEASE UNI.XT

INSTANT DE-RIGGING! Due to the modified position of the standard cleat, just place one foot on the extension and pull the rope with a short jerk out of the cleat – done.